Fenders Removal???, who has removed or replaced fenders before? Options

[W8NKER]

So i have damaged my Front Left fender and im planning on removing it and seeing what i can do about the damage when i get some free time.
I cant seem to find anything online about 6gc fenders and how they are removed, does the front bumper need to be removed first? where to start? etc
Would save me a lot of time thanks,

[jordisonjr]

Your front bumper will have to come off.
Here's how you do it: http://www.6gc.net/forums/index.php?showtopic=28434

As for the fenders, there bolts on top of the fenders within the engine bay. That would be a good start. The fender liners will also have to come out. Once you're at that point, I'm sure you'll be able to see any other areas where the fender has been fastened to the chassis

[HectortheRican]

Like jordisonjr said, you'll have to remove the bumper and fender liner. There are the bolts on top of the fender (in the engine compartment), one or two on the bottom rear (where a mudflap would go) and also a few bolts along the rear edge of the fender (the fender/door seam). You'll have to open your door all the way for access to these. You'll need a decently long ratchet extension as well.

This post has been edited by HectortheRican: Oct 19, 2016 - 7:02 PM

[W8NKER]

Cheers boys, this information will help me a lot.