Rebuild SSS (Super Strut Suspension), SSS Options

[Wild202]

Do you sell any of this? Or just for you?

Yes, I can do for you, such suspension arms.
You can send me a private message or you can right here in the topic discussed. As you will be comfortable.

[Wild202]

I can explain why I decided to do it.
The thing is that the new OEM suspension arms are sold at very high prices.
Here is an example:
two lines (horizontal) arm - $ 830
Two banana lever - $ 630
two figure 8 - $ 230

total: $ 1,700, it is very expensive for me.

[Wild202]

I make the suspension arms are much cheaper and can be used repeatedly. You just unscrew the rear cover and replace with a new sleeve.
Here are some examples of my work:
https://drive.google.com/drive/folders/0B55...OThsY05iUmhlUFk

[texasnick]

I make the suspension arms are much cheaper and can be used repeatedly. You just unscrew the rear cover and replace with a new sleeve.
Here are some examples of my work:
https://drive.google.com/drive/folders/0B55...OThsY05iUmhlUFk

If you can manufacture these parts and provide details on how to install without pulling the arm assembly off, you will be providing a much needed solution to the age old SSS replacement problem.

This would be a great solution for those of us that are in North America. It is a pain to send 100 lbs of metal to Poland, wait for a rebuild and then pay for them to be shipped back.

Nick

[Wild202]

I make the suspension arms are much cheaper and can be used repeatedly. You just unscrew the rear cover and replace with a new sleeve.
Here are some examples of my work:
https://drive.google.com/drive/folders/0B55...OThsY05iUmhlUFk

If you can manufacture these parts and provide details on how to install without pulling the arm assembly off, you will be providing a much needed solution to the age old SSS replacement problem.

This would be a great solution for those of us that are in North America. It is a pain to send 100 lbs of metal to Poland, wait for a rebuild and then pay for them to be shipped back.

Nick

No problem. Let's discuss this question.
It can be right there in the theme, I have nothing to hide.
I can do for any such leverage and further maintenance is not very expensive. If you need repairs bushings kits - also no problem.

[Wild202]

So, yesterday finished Rebild next set SSS suspension arms.
Levers will be sent across the border of the country, so I bought arms with mileage and worked on their Rebild.
Remember, Rebild made from my suspension arms.
Photos here:
https://drive.google.com/drive/folders/0B55...REV2VS15SVdjU2M

[Wild202]

So. Continued.
Recently sent me mail the old levers SSS suspension.
In order to restore their work.
Here is a photo of suspension arms: https://drive.google.com/drive/folders/0B55...bXV2aTdmMF9Ia2c

[Wild202]

The photo shows that the suspension arms have someone trying to restore.
Further disassemble and seen what was done. Visible traces of very poor repair, or rather - not proper repair.
https://drive.google.com/drive/folders/0B55...MHdGTFhSMXFZb28

[Wild202]

Inner sleeve all the broken 100%
Just throw them all.
https://drive.google.com/drive/folders/0B55...SGU0WFpxQWlES2s

[Wild202]

We put new plugs. Like these ones: https://drive.google.com/drive/folders/0B55...TFBUamQtempuSnc

[enderswift]

Good work dude

[Wild202]

Good work dude

Thank you

[Wild202]

But that is not all.
Then give your fingers in the hinges of the order (Polished fingers)
https://drive.google.com/drive/folders/0B55...bnplYkJDVGlfWGs

[Wild202]

The assembly, paint and suspension arms are ready for use.

https://drive.google.com/drive/folders/0B55...bDk5VFdqNV9MbEk

[BonzaiCelica]

cool, your basically showing the whole process of what the guys in poland do. I asked them to show me pics of the process but they said they never took any. now how it works.

[Wild202]

cool, your basically showing the whole process of what the guys in poland do. I asked them to show me pics of the process but they said they never took any. now how it works.

The guys from Poland were greedy?
I plan to continue to update my posts.

[Wild202]

Thus, continued.
I got another package, in which lay the old levers SSS suspension.
https://drive.google.com/drive/folders/0B55...ZmJGbTJtTmItajQ

[Wild202]

Look further. What's inside?
The photo shows that one finger the ball on a banana bent suspension arm (probably a consequence of the strong impact of the wheel obstacle).
https://drive.google.com/drive/folders/0B55...a0hvRy0zdzVLaWc

[Wild202]

The bent and deformed fingers ball throw in the trash and put here are:
https://drive.google.com/drive/folders/0B55...dVB5OV95ZG43T3c

[Wild202]

We collect everything, we paint.
+ Whole anthers on the ball fingers instead of torn and everything is ready.
https://drive.google.com/drive/folders/0B55...VExEZzByOVhEdFU