Red205 |
Red205 |
Sep 21, 2018 - 5:16 AM |
|
Enthusiast Joined Sep 13, '18 Currently Offline Reputation: 0 (0%) |
Thought I would put a short post up about my ST205, always open to comments and ideas on what to do next as I am a tinkerer at heart!
I sold my R33 Skyline 4 years ago, previous to that I had a VX220 and a 350z so was enjoying switching cars every year or so. I was really after a 300zx TT with targa top but one that wasn't a certified rot box was proving difficult to find. I saw an ad pop up just 45 mins drive from me for something called an ST205 Celica GT-Four. Now, I grew up in the eighties, I played sega rally - but never really thought of buying a rally car! I thought what the heck went for a look and was genuinely blown away by how many boxes the car ticks without becoming completely compromised in some of the key areas such as performance and handling. I had a 3 year old son at the time, and to be able to throw all his stuff in the boot along with child seat in the back and missus riding shotgun it worked really well! Anyway, it started off looking like this when I bought the car I tinkered with a few bits on the interior which was pretty bland and dark inside. I was lucky enough to have a sunroof with the car which helped but wanted to brighten it up a bit and make it a nicer place to be. Sprayed the interior plastics with some pastidip, changed the gear stick and handbrake over, added some chrome sills (super rare option I found second hand) added a double din head unit, new speakers all round, some base in the boot etc. Also added in some LED dash lights and chrome rings to the dials. There were other touches as well, adding dash cam, wiring up the car so I could add devices/chargers cables for iPhone etc. New car mats (Nicomats) full clean inside leather clean down etc. Changing the rear speakers was a pain, had to remove the seats and everything! I guess next step was to check the car in at a dyno, recorded a healthy 281bhp It has a decat and straight through 3 inch exhaust which helps! Otherwise the car is pretty much standard. Under the bonnet I didnt have many concerns as the previous owner had kept it in good condition. I then addressed two things that were bothering me at the time, which was the ride height and wheel choice! Was not a fan of the hundreds of spokes on the Team Dynamics so switched out for some 5 spokes with a diamond cut lip and some depth to them and also added some Tein springs to drop the ride height around 15mm. Was also a good time to add new rubber so on went some Vredestein Vorti's. With new wheels comes new geo, so off to get that done, generally it turned out a good tune to the handling So why not go off to meet ST205 friends! It was here I fell in love with the look of the silver one in the foreground, more on that later Also time to do some driving across the country on a road trip to Scotland! And make it into a UK Jap Car mag I then looked at the roof, I wanted something that flowed a bit more front to back, the sunroof was black, the visor also (rare OEM Toyota optional extra) so decided to go for a roof wrap So, the silver car I mentioned earlier, one thing that I didnt quite like with the car was with the skirts and spats the nose looked a bit too 'pointy' for my liking. But I lvoed the flatter more modern look of the silver car with the C-One bumper. So I took a leap and switched it over ending up with this - some people like it some vilified me for ruining the car, ultimately, its my car, I like it, end of story! So off to the annual Ace Cafe GT-Four meet, 60 fours turn up, in the category of ST205 mine came in second! Gutted, but the winning car had something like £30k thrown at it with custom bodywork, forged engine etc so I was not really in with a chance. And his is white, everyone prefers white maybe haha So there we have it...I have a machine polisher and do all my own work on maintaining the finish, its a red and stored outside so very aware of colour damage so its always well looked after. It has a web page here even Celica Site Crazy thing is I usually keep my cars for about 18 months and move to the next, this I have now had for nearly 4 years! Lets see how we go... Col |
Sep 21, 2018 - 5:34 PM |
|
Enthusiast Joined Jun 9, '16 From Minnesota Currently Offline Reputation: 0 (0%) |
Looks good! Your exterior mods seems to be all in the works so I think if anything... MORE POWER!
Once thing I would say is spacers for the wheels. Not sure how the front is but getting some in the back should let it sit out nicely flushed w/ the car. |
Sep 21, 2018 - 7:13 PM |
|
Enthusiast Joined Nov 7, '06 From Houston, Tx Currently Offline Reputation: 17 (100%) |
which dash cam is that?
-------------------- -Alex {](O_o)[}
1993.5 Toyota Supra ....with stuff.... ....sorta broken.... 1998 Toyota Celica ....this one, too, has stuff.... ....broken....yeah...definitely broken.... |
Sep 22, 2018 - 4:54 PM |
|
Enthusiast Joined Sep 13, '18 Currently Offline Reputation: 0 (0%) |
It has 5mm spacers all round, the wheels are 35 offset to fronts are about flush rears slightly in, if I wanted the rears further out it would need hubcentric spacers, new bolts etc. as the ones on the car wouldn't have enough length on them. Dash cam is some ebay jobbie from China, I just put it in there but then replaced it with a better brand later on down the line.
I have a quite extensive parts list of mods to the car, in summary what I have done is... HKS blow off valve K&N panel filter Full red Samco hose set - air and water RTP three point strut brace 'GT-Four' custom aluminium battery stay Slam panels wrapped in chrome black Sprayed all cap lids and dipstick in red Painted the turbo heat shield satin black Painted the turbo and alternator aluminium GT-Four vent plate Shortened throttle cable Drift oil cap, HKS rad and charge cooler caps Replaced gear linkage bushes Japspeed 3 inch stainless steel exhaust Decat turbo downpipe Replaced with Fensport: AC belt, PAS belt, Cambelt kit, Water Pump, Thermostat, Rotor Arm & Distribution Cap Magnecor Silicon Lead set Replaced all seats with leather seats Custom GT-Four billeted aluminium gear knob Leather sports steering wheel Sparco aluminium handbrake cover Black leather gear and handbrake gaiters Chrome dial rings Ice Blue dash LEDs JVC double din head unit with BT and hands free Pioneer 8inch three way speakers 2013i (80RMS) Alpine 6.5inch two way speakers G-Series (50RMS) Alpine SWE-815 active subwoofer and enclosure Custom GT4 car mats Toyota Genuine Chrome kick plates Door latch chrome covers TRD rear spats with TRD side skirts C-One replacement front bumper Riser blocks from the WRC model for the rear spoiler Genuine Toyota rear sun visor Clear lenses/indicators all round Face lift rear lights Gloss black wrapped roof Black GT-Four decals on riser blocks KYB shocks Tein lowered springs Replacement OEM top mounts front struts Braided brake hoses Fully refurbished brake callipers Replaced Camber Control Links Replaced ARB Links (Fig 8s) Rota GTR wheels 18x8 35 offset Vredestein Vorti tyres Neo Chrome nuts and caps Geo set-up at Wheels in Motion Evora slotted Discs Red Stuff EBC Pads More power? I think I am going to sit on it for now, more power even though its safe to run up to around 330bhp on these engines will ultimately shorten the engine life. It has about 92k miles on it at the moment and to be honest its got plenty of poke at the moment. When it comes to sale time I like to think it will be sold as a stock engined car which has been meticulously looked after! |
Sep 30, 2018 - 6:03 AM |
|
Enthusiast Joined Dec 7, '17 From España Currently Offline Reputation: 0 (0%) |
Muy guapo, aun que yo dejaría puesto el paragolpes delantero de origen.
Un saludo -------------------- http://www.6gc.net/celicas/celica-st-6gen-16118
Mi Blog https://toyotacelicaue.wordpress.com/2018/0...trada-del-blog/[color="#0000FF"][/color] |
Oct 1, 2018 - 2:52 AM |
|
Enthusiast Joined Sep 13, '18 Currently Offline Reputation: 0 (0%) |
Muy guapo, aun que yo dejaría puesto el paragolpes delantero de origen. Un saludo Thanks, gracias! The bumper is a polarising thing, people either love it or hate it. With the side skirts and rear spats the front looks odd in my view, its too high, too long and makes the car look out of proportion even the front spats didnt really change that. If you have the side skirts you do need to add at the least a lower lip to make the bottom lines of the car run clean around the car. Anyway that was my thinking, it looked a bit 'pointy' otherwise the replacement makes it look more modern. But hey its all subjective. Got a new knob for it at the weekend, custom all aluminium 300g, have ordered some suede and am going to make my own gaiter to go with it too. |
Oct 1, 2018 - 12:29 PM |
|
Enthusiast Joined Jun 9, '16 From Minnesota Currently Offline Reputation: 0 (0%) |
Ah I see, I ran 20mm hubcentric spacers in the back at one point and it was good.
I'd still say that's something to go w/. I forgot the brand of mine but it's good quality. The only problem is to make sure your wheels have the gap in the back or else you're going to have to go the spacer + longer studs route. What about the headlights? The JDM HID one's would be a good upgrade. And mmmm that knob looks good, where'd you get it? This post has been edited by TimeslideZ: Oct 1, 2018 - 12:29 PM |
Oct 2, 2018 - 2:45 AM |
|
Enthusiast Joined Sep 13, '18 Currently Offline Reputation: 0 (0%) |
Ah I see, I ran 20mm hubcentric spacers in the back at one point and it was good. I'd still say that's something to go w/. I forgot the brand of mine but it's good quality. The only problem is to make sure your wheels have the gap in the back or else you're going to have to go the spacer + longer studs route. What about the headlights? The JDM HID one's would be a good upgrade. And mmmm that knob looks good, where'd you get it? I have the car lowered so a little concerned about arch rub, maybe could stick the wheels out further but maybe a project for next year. The projector headlights are a minimum £400 used which seems a little rich to replace some headlights I have at the moment that work fine, I hardly ever drive in the dark anyway so it would be a bit of a vanity purchase more than anything. £400 could be better spent elsewhere. Knob was done by a trader on ebay called m-tech, I always use them. You basically ask them what you want and send them a design and they will make it for you, that was £40 and its threaded on not held on with cheap pins that you pin in from the sides. |
Lo-Fi Version | Time is now: November 28th, 2024 - 11:15 AM |